Fibreglass Pool Resurfacing – The Procedure Involved and the Benefits
A swimming pool is a pleasant sanctuary that adds charm to your backyard and raises the value of your home. It gives the perfect reason to spend a Sunday in the sun and maintain a good exercise schedule. However, unlike yards and gardens, swimming pools are frequently ignored, making them vulnerable to the elements and aging with time.
Pool resurfacing is a maintenance treatment done once every eight years to make the pool beautiful and healthy. During the resurfacing process, the sealing or plaster placed when the pool was first built is removed. It is then replaced with a new sealer, plaster, or tile.
Steps in the pool resurfacing process
There are numerous steps involved in pool resurfacing, including:
Drain the swimming pool
Draining the pool is the very first step in resurfacing it. Before you begin, find out from your local authorities where you can drain the water you want to remove from your pool. You should also make inquiries about whether you require any permissions for resurfacing your pool. To quickly remove all the water from the pool, you can also use a sump pump, which is available for rent. Before proceeding to the next steps, make sure the swimming pool is completely drained and dry.
Prepare the pool surface
There is a high probability of your pool having dirt, leaves, and debris all over it. You might also find rust patches in the pool that require cleaning. Removing these stains is necessary since pool resurfacing can be ruined by even the smallest amount of residue. You should also pressure wash your pool after clearing out the majority of the detritus to get rid of any algae or stains that may have remained.
To cleanse and prepare the surface, you can use chemical treatments or chemical washes. You can use a chisel or sandblaster to remove the substrate concrete. This will guarantee that the fresh material adheres well. You should do this process slowly, focusing on a small portion of the swimming pool in succession. Depending on how big your pool is, this process could take around three days.
You must clean the pool again in case you used a sandblaster or did chemical treatments. Use a dry/wet vacuum to remove the stripped items.
Checking for structural cracks is also an important step. Use underwater swimming pool patching to repair any cracks and holes. Depending on the design of your swimming pool, there are numerous types of pool patching available on the market. If you are worried about some hidden problems, it is advisable to hire a contractor.
Prime the pool surface
The majority of pool surfaces need a particular primer epoxy before the restoration solution is applied. Apply the appropriate primer as directed on the packaging, protecting yourself from any hazardous chemicals and fumes with gloves and masks. Coat the entire pool surface using the primer. Allow it to completely dry before beginning the next step. This process should take between two and four hours based on your pool size. Contact the fibreglass pool builders in Queensland for expert pool resurfacing advice.
Paint the pool surface
After the primer has dried, begin painting your swimming pool with a resurfacing solution or topcoat epoxy. While painting, carefully follow the guidelines and recommendations of the manufacturer. You should paint from the deep end to the shallow end. Before adding the second layer, allow the topcoat to completely dry. Sand your pool between coats to make sure the subsequent coating adheres well. The majority of pools require three or four coatings. The time taken for this step is heavily dependent on the weather.
Refill the swimming pool
After finishing the final topcoat, do not fill the swimming pool immediately. The majority of manufacturers suggest allowing the pool to sit dry for around five or seven days after applying the final coat of epoxy. After the stipulated time, fill your pool and enjoy a refreshing swim.
Benefits of pool resurfacing
Resurfacing your pool has numerous benefits that include:
Makes the pool visually appealing
Pools made of fibreglass have a beautiful look. With pool resurfacing, your swimming pool will continue to look brand new for several years. This also highlights the cleanliness of the pool water, further improving its charm and appeal.
Effective insulation of the pool water
The majority of pool owners prefer to swim in warm pools. Fibreglass pools provide better insulating and heat retention properties compared to their counterparts. Fibreglass resurfacing will considerably reduce your heating bills.
Reduces algae growth
Due to their polished and smooth surfaces, fibreglass pools provide a less favourable habitat for the bothersome algae to flourish. The small amount of algae that might develop can be easily removed using a brush.
Needs fewer chemicals
Algae have a difficult time reproducing in a fibreglass pool. This implies that you require fewer chemicals to maintain clear and clean pool water. Since the amount of chemicals and chlorine is less, your family and your guests can enjoy a more refreshing swim. You can also save a lot of money that would otherwise go into buying costly chemicals. It is also an environmentally friendly option.
Increases the home value
A swimming pool that appears to be in excellent condition will tremendously increase your home’s value. Fibreglass finishes are low maintenance, which will be an added advantage in the eyes of a potential buyer.
Fibreglass lacks pores, which makes it resistant to stains when compared to its counterparts. As a result, the swimming pool will be safer and cleaner. Your family and guests will not have to worry about seeing any unattractive stains or rust while having fun in the pool.
It is fashionable to have a swimming pool in your backyard. But a swimming pool requires proper care and resurfacing to continue looking alluring. Pool resurfacing is a difficult and time-consuming task. It also involves using numerous tools that you may not be familiar with or comfortable with. In such a case, it is advisable to hire an experienced professional to conduct the pool resurfacing. This not only removes the pressure from your shoulders but will also ensure that the resurfacing is done perfectly.